- 5 ft wide
- 16 ton capacity…..8 ton a side brevini drives 2 speed
- 14 km/hr top speed
- Full remote control (no cord) with remote E STOP
- Walk behind controls
- 20 000 lbs winch also no cord R/C
- 4 hydraulic levelling legs (can drill directly over another hole in a perpendicular fashion)
- SPT hammer and up to 6” geo stem solid or hollow with a depth of up to 40 meters
- 99 hp Kubota diesel
- 20 gallon hydraulic tank (very small enviro impact in case of leak)
- 13650 in/lbs of rotary torque 300 rpm
- 350 gallon water tank5 f2” MYNO pump in a heated compartment (no drain down for line changes)
- 12 ft mast with dynamic brake on pull down…( pull down never creeps down)
- Stem handler for quick pipe change
- 14 inch wide rubber tracks
- 6 idlers per side instead of 5 (more floatation)
- Very low center of gravity
- Fully belly panned with front brush guard
- 1 ton truck movable (cheaper MOB and quicker line placement)
- Can drill DTH AIR with compressor attachment
- Very good production rates with this unit
- BC rotary, ROPS, and safety compliant
- Tracks can be “corked” for icy/hilly conditions
- Very good ground clearance with excellent traction
- Extremely manoeuvrable with 360 degree turning
SAFETY FEATURES
- Hydraulic locking mast
- Mechanical spring locking parking brake with hydraulic detent
- Very low center of gravity
- Mechanical spring locking pull down motor with hydraulic detent
- All required signage, safety equipment and training
- Double chain on pulldown with safety master link chain
- Full R/C for steep hills with no risk to operator
- Full R/C winch with no risk to helper
- Park brake ALWAYS ON unless moving…non operator controllable
- Horse power limiting valve to prevent stall on big hills ( no risk of roll back.)
- Stem handler design for no heavy lifting (prevent injury)
Hobo Exploration 